 |
 |
 |
 |
 |
 |
|
|
|
HOME > EQUIPMENT > Forming > 2Heads Depositor-Wirecut
» 2Heads Depositor-Wirecut
A flexible depositing machine that, equipped with different configuration, can produce a wide range of products such us:
The unit consists of a base that on request can be manufactured entirely in stainless steel, which is an essential feature for complex cleaning operations such as when egg-based doughs are used. The base houses all the movement systems for the head above, with all the motors and mechanical devices located outside the shoulders, in order to facilitate inspection and servicing operations. The machine is designed to leave clearance of about 400 mm above the ground to facilitate cleaning operations.
Each depositing head consists of a stainless-steel hopper which can easily be removed, a pair of grooved rollers, under which there is a metering group consisting of a pair of lobe pumps that ensure perfect control of the weights right across the work width. The machine can thus be loaded with two types of dough, of different colours. A coextrusion chamber combines the two different doughs to create unique products in a variety of combinations. This chamber is the heart of the coextrusion process and its manufacture requires the use of high-precision operating machines to ensure the degree of accuracy required for components that are essential for obtaining the highest quality of coextruded products.
The movements of the head are the classic ones of a depositing machine: the head is lowered to deposit the dough on the oven belt, and it follows in the direction of the belt during the depositing operation, before rising up and returning to its initial position for the next deposit. The operator interface, with its colour touch-screen monitor, is located at the side of the machine and can be used to make all the necessary adjustments, as well as recording the various work settings and displaying a list of past faults.
The unit can also work with a single head for the production of more traditional deposited products, and it may also be equipped with rotating nozzles, or completed with a jelly topper to make the products even more lavish.
It is worth pointing out that the machine is designed in line with Imaforni’s most modern “tool-free” design philosophy, which means that all normal maintenance operations can be carried out by the operator without the need for any tools. This means that the hopper can easily be removed, and the die plate and the pumps can be completely extracted and taken on a special trolley to the cleaning room, while the grooved rollers in stainless steel remain in place. At this point it is possible to clean the machine on-site, using the standard accessory kit provided with the unit.
The unit can be supplied with a working width from 1.000 up to 1.500 mm.
» For any further clarification concerning our products contact us
A flexible depositing machine that, equipped with different configuration, can produce a wide range of products such us:
- Simple deposit
- Deposit with inclusions
- Swirl deposit
- Plain wirecut
- Wirecut with inclusions
- Two-colour wirecut
- Two-colour deposit
- Soft centre
- Fruit bars
- Product topped with jam
The unit consists of a base that on request can be manufactured entirely in stainless steel, which is an essential feature for complex cleaning operations such as when egg-based doughs are used. The base houses all the movement systems for the head above, with all the motors and mechanical devices located outside the shoulders, in order to facilitate inspection and servicing operations. The machine is designed to leave clearance of about 400 mm above the ground to facilitate cleaning operations.
Each depositing head consists of a stainless-steel hopper which can easily be removed, a pair of grooved rollers, under which there is a metering group consisting of a pair of lobe pumps that ensure perfect control of the weights right across the work width. The machine can thus be loaded with two types of dough, of different colours. A coextrusion chamber combines the two different doughs to create unique products in a variety of combinations. This chamber is the heart of the coextrusion process and its manufacture requires the use of high-precision operating machines to ensure the degree of accuracy required for components that are essential for obtaining the highest quality of coextruded products.
The movements of the head are the classic ones of a depositing machine: the head is lowered to deposit the dough on the oven belt, and it follows in the direction of the belt during the depositing operation, before rising up and returning to its initial position for the next deposit. The operator interface, with its colour touch-screen monitor, is located at the side of the machine and can be used to make all the necessary adjustments, as well as recording the various work settings and displaying a list of past faults.
The unit can also work with a single head for the production of more traditional deposited products, and it may also be equipped with rotating nozzles, or completed with a jelly topper to make the products even more lavish.
It is worth pointing out that the machine is designed in line with Imaforni’s most modern “tool-free” design philosophy, which means that all normal maintenance operations can be carried out by the operator without the need for any tools. This means that the hopper can easily be removed, and the die plate and the pumps can be completely extracted and taken on a special trolley to the cleaning room, while the grooved rollers in stainless steel remain in place. At this point it is possible to clean the machine on-site, using the standard accessory kit provided with the unit.
The unit can be supplied with a working width from 1.000 up to 1.500 mm.
 |  |  | |  | |
» For any further clarification concerning our products contact us
© IMAFORNI INT'L S.p.A. - Via Strà 158, 37030 Colognola ai Colli - Z.I. Verona (Italy) - Tel. +39 0456174711 - Fax +39 0456150065 - P.IVA 02681970238| Legal disclaimer